Sandblasting Equipment

Blasting Helmet

We have four type of blasting helmet, The four blasting helmet have different feature but same quality

The four type of blasting helmet as follows:

- CLEMCO Helmet Apollo 100
- CLEMCO Helmet Apollo 600
- ASTRO Helmet
- EASTSUN Helmet

1.CLEMCO Helmet Apollo 100

Our most economical respirator delivers lots of value. The Apollo 100 is a single-shell construction helmet supported by an adjustable suspension. The Apollo 100 comes standard with DLX comfort-fit suspension. The DLX suspension surrounds the operator's head with comfortable padding. A chin strap holds the helmet firmly in place. The rectangular window provides a clear field of view. An inner fixed lens and one middle lens seal out dust and abrasive.

Available for use with compressed air (HP Model) or air pump (LP Model).

Up to three lightweight, disposable outer lenses, held in place by a hinged frame, protect the middle lens from pitting. As the outermost disposable lens becomes pitted, it can be torn off to expose the next lens.

Advantages

. DLX comfort-fit suspension
. Box-front window features economical replacement lenses
. Sound-attenuating, air-distribution channel
. Lightweight construction
. Molded-in carrying handle
. Allows operator to wear supplementary hearing and primary eye protection

NOTE: Prior to use, ensure that the Apollo, type CE, supplied-air respirator is appropriate for your specific blasting conditions and requirements.

2.CLEMCO Helmet Apollo 600

The Clemco Apollo Series Supplied-Air Respirators are hallmarks of safety, comfort, and performance. Recognizable by their bright red-orange color, Apollo 600 Respirators are easily visible on the job site. Their wide-span window offers the wearer a commanding view of the work surface and broad-scope peripheral vision. The 600 has new features making it comfortable to wear, easier to maintain, and more durable, promising a long service life. The Apollo 600 is a single-shell helmet with two adjustable suspension options. The DLX comfort-fit suspension (2 sizes) surrounds the operators head with comfortable padding. The adjustable web suspension fits head sizes 6.5 to 8. Adjustable chin strap holds the helmet in position on the operator's head.

The helmet features:

-Two suspension options: web-style or DLX comfort-fit style
an integral strap for carrying or hanging the helmet
a replaceable inlet fitting, an area of the helmet assembly subject to high-stress when the user carries the helmet by the breathing tube
a deep window frame that extends over the cape attachment area to prevent cape wear from rebounding abrasive
a molded window gasket that securely grips the inner lens and prevents media ingress
a three-lens system with outermost perforated tear-away lenses to speed the way to clear vision during the blast operation and an intermediate lens to provide additional sealing and to protect the durable fixed inner lens from premature wear
an integral visor that extends over the tops of the installed lenses to prevent media from lodging between the lenses
a silver-grey cape that reflects the sun's hot rays
a comfortable zip-in-and-out replaceable knit neck collar that can be removed for laundering

The helmet assembly is durable and designed to provide years of service. It is NIOSH-approved as a type CE continuous-flow respirator and carries ANSI Z89-2003 approval as a category G hard hat.

The breathing hose attaches in the center rear of the helmet for comfortable balance on the head. Incoming air moves through a channel for even distribution from the top of the head for easy breathing and operator comfort. The generously-sized helmet protects the user from the harsh environs of the blast job site and keeps the wearer clean.

The Apollo 600 is rugged, durable, and built to withstand the harsh blast environment.

3.ASTRO Helmet

YOUR LIGHTWEIGHT, ROBUST, QUALITY ABRASIVE BLASTING HELMET

The ASTROT is your number one choice of economy abrasive blasting helmet which meets safety standards worldwide including Australia, Europe and USA. Astro has called on years of experience in the abrasive blasting industry to design this lightweight, robust helmet. The ASTROT incorporates features that reduce fatigue and downtime, increase productivity and minimize the need to replace parts.

Flow Control Valve

It provides the ability to adjust the incoming airflow to suit the wearer's requirements.

Low Pressure Constant Flow Valve

For use with Low Pressure Air Pumps. And it's built to last even in the most extreme blasting conditions.

4.EASTSUN Helmet

EASTSUN window type sandblast comes complete with a heavy duty cape,an air hose and a set up visor pack. Designed to protect blasting operatorsfrom the hazards associated with abrasive blasting,features a rugged outer shell which provides excellent high impact strength.

Features:

-Easyily adjustable suspension to suit various head sizes.
-Integral strap for carrying or hanging the helmet.
-Deep window frame that extends over the cape attachment area to prevent cape wear from rebounding abrasive.
-Breathing hose attaches in the center rear of the helmet for comfortable balance on the head.

Proposed stainless steel with mesh reinforcement

-Stainess Steel Wire Mesh to be made for reinforcement beween the two layers of plastic .Stainless Steel Wire Mesh to replaceable like plastic sheet and to have a thin boundary around its edges/ broders,enabling ease of mounting and no possibility of being pricked by the wire mesh.
-Plastic adjustable harness car adjusted for different head size
-Can be adjusted for different head sizes.

Next Page »

Previous Page «